Agfa CP1000 Automatic Film Processor

• CP1000 is a compact and lightweight film processor that is ideal for low-volume processing or back-up purposes
• Doesn't require professional installation. Setting up and installing takes less than one hour and requires only simple tools
• Fast start up (7 minutes from cold start)
• 125-second cycle time
• Uses a simple, accessible film transport system with fewer rollers instead of conventional heavy roller racks
• Uses an infrared dryer instead of a typical hot-air dryer. It's fast drying, quiet and energy efficient
• Easy to Clean - With the cover removed, the tanks are easily drained. Rollers, guide plates and chemical tanks lift out and are easily rinsed in a sink. The processor can be properly cleaned in only minutes
• Uses only 400 watts of power compared with the typical 1500 watts for other processors. In standby mode it uses only 100 watts
• Automatic temperature control and drying
• Footprint: 39"W x 25.5"D x 17"H (without Light Cover); Minimum counter size required: 26" x 26"
• Requires NO plumbing
• Optional: Extra replenishment kit available for larger volumes 
• Click here for a brochure

Click here for a larger image of this product.

          apexx: $ 3295

ECOMAX™ Automatic Film Processor

• The ECOMAX™ is a compact and lightweight film processor ideal for lower volume processing or back-up purposes
• All parameters of the ECOMAX™ X-Ray film processor affecting image quality are factory set to optimal values. This makes the operation easier and reduces operator error
• Just plug in the new processor and fill it with chemicals and the ECOMAX™ is ready for operation
• The small re-shaped developer and fixer tanks reduce oxidation of large quantities of chemicals. This helps to save money and is good for the environment
• The replenishment rate is automatically adjusted to the actual processed film quantity. When no film is being processed, the ECOMAX™ remains in standby mode
• Processor automatically performs anti-crystallization every 20 minutes and anti-oxidation processes every 60 minutes
• The ECOMAX™ stays operational and produces consistently good image quality even after being in standby mode for a long period of time
• 100-second cycle time
• Capacity:
  • Film format 4” X 4” (10 x 10 cm) (3 x parallel): 417 films/hour
  • Film format 8” X 10” (18 X 24 cm) (2 x parallel): 148 films/hour
  • Film format 10” X 12” (24 x 30 cm): 74 films/hour
  • Film format 14” X 17” (35 x 43 cm): 45 films/hour
• Dimensions: 35"D x 27"W x 17”H
• Electrical connections: 115 V ± 15%; 50/60 Hz or 230 V ± 15%; 50/60 Hz
• Doesn't require professional installation. Setting up and installing takes less than one hour and requires only simple tools
• The ECOMAX™ comes complete with all accessories
• Optional: Closed Loop Kit ( $150 ) (User-installed kit eliminates need for plumbing) Click here for a video to see more)
• Optional: Stand ( $150 )
• Click here for a brochure

Click here for a larger image of this product.

          apexx: $ 2850

Click here for a larger image of this product.

          apexx: $ 3950

Click here for a larger image of this product.

          apexx: $ 5497

Agfa CP1000 Automatic Film Processor

• CP1000 is a compact and lightweight film processor that is ideal for low-volume processing or back-up purposes
• Doesn't require professional installation. Setting up and installing takes less than one hour and requires only simple tools
• Fast start up (7 minutes from cold start)
• 125-second cycle time.
• Uses a simple, accessible film transport system with fewer rollers instead of conventional heavy roller racks
• Uses an infrared dryer instead of a typical hot-air dryer. It's fast drying, quiet and energy efficient
• Easy to Clean - With the cover removed, the tanks are easily drained. Rollers, guide plates and chemical tanks lift out and are easily rinsed in a sink. The processor can be properly cleaned in only minutes
• Uses only 400 watts of power compared with the typical 1500 watts for other processors. In standby mode it uses only 100 watts
• Automatic temperature control and drying
• Footprint: 39"W x 25.5"D x 17"H (without Light Cover); Minimum counter size required: 26" x 26"
• Requires NO plumbing
• Optional: Extra replenishment kit available for larger volumes 
• Click here for a brochure

          apexx: $ 5995